High Pressure Water Jetting for Drainage & Sewer Lines
Powerful, pipe-safe hydro jetting that clears grease, sludge, scale and root intrusion from commercial and industrial pipelines across KL & Selangor.
About This Service
Reliable, compliant and professionally executed
High pressure water jetting is the most effective way to restore full flow in drains and sewer lines without harsh chemicals. Akelus Eco Solutions operates jetting rigs sized for everything from kitchen pipework and floor traps to large-bore main sewers in malls, factories and condominium blocks.
We pair jetting with CCTV pipeline inspection so you see exactly what was cleared, and what (if anything) needs follow-up. Recurring blockages get a preventive jetting schedule that keeps your downtime to zero — backed by our full range of sewerage services in KL & Selangor.
Who This Service Is For
Our Approach
How Akelus Delivers This Service
Diagnose
CCTV pipeline inspection to identify blockage type, location and severity.
Jet & Clear
Select the right nozzle and pressure, then jet the line to fully restore flow.
Verify
Re-inspect with CCTV to confirm the line is clean end-to-end.
Prevent
Recommend dosing or scheduled jetting where recurring buildup is likely.
Blockages Water Jetting Clears
Jetting works on the blockages that defeat rodding, because it scours the full internal diameter of the pipe rather than punching a hole through the obstruction.
Hardened grease (FOG)
Commercial kitchen lines coated with fat, oil and grease — jetted with rotating degreaser nozzles.
Sludge & silt
Storm drains, sumps and main sewers holding compacted silt that mechanical rodding can't shift.
Root intrusion
Fine roots entering joints and cracks — cut back with root-cutting nozzles, then CCTV verified.
Scale & mineral build-up
Narrowed cast iron and concrete pipes restored close to their original bore.
Foreign objects & debris
Rags, wipes, plastics and construction debris flushed out to the nearest manhole.
Recurring slow drains
Lines that block every few weeks — jetted clean, then placed on a preventive schedule.
Signs Your Line Needs Jetting
What Affects Water Jetting Cost
Every site is different, so we quote per job rather than publishing a flat rate. These are the factors that move the price.
Pipe diameter & length
Large-bore main sewers need higher flow rigs and more time on site than kitchen pipework.
Blockage type
Hardened grease, scale and roots take longer than loose debris or silt.
Access points
Available manholes and rodding eyes decide how far the hose has to be run.
CCTV inspection
Pre- and post-jetting camera work adds cost but proves the line is genuinely clear.
Urgency
24/7 emergency call-outs are priced above scheduled maintenance jetting.
Water supply on site
Where no supply is available we bring water, which affects tanker time.
Industrial High Pressure Water Jetting
Industrial sites block differently from homes: higher volumes, heavier solids, oil and process residues, and pipework you cannot simply take out of service. Our truck- and trailer-mounted jetting systems combine high-flow pumps, long hose reels and interchangeable nozzles with a vacuum tanker on the same visit, so the line is scoured and the waste leaves site in one operation.
Factory effluent lines
Process discharge pipework, wash-bay drains and sumps carrying solids, oil and sludge.
Treatment plant pipework
Inlet and outfall lines feeding STPs and PTPs, cleared before they choke the plant itself.
Large-bore main sewers
Mall, hospital and condominium main lines where rodding cannot reach or hold.
Storm drains & culverts
Silt-laden surface drainage cleared ahead of the monsoon season.
Interceptors & sumps
Oil, silt and grease interceptors jetted and vacuumed back to working capacity.
Planned shutdown work
Jetting scheduled into shutdown or off-peak windows so production is not interrupted.
Where the blocked line feeds a treatment plant, clearing the pipe is only half the job — see STP maintenance and PTP maintenance for the servicing side.
Pipe-Safe Jetting & Verified Results
Pressure is matched to the pipe, not the blockage. Our operators check material and condition first — PVC, concrete, clay or cast iron — and select the nozzle and pressure setting accordingly, so old and fragile lines are cleared without damage. Where a pipe is already fractured or collapsed, jetting stops and we report it instead of making it worse.
Every commercial job can be verified with CCTV pipe inspection so you see the line before and after. Grease-heavy kitchens are usually best paired with regular grease trap cleaning, and where solids need removing from site we bring a suction tanker on the same visit. As a CIDB & SPAN-registered contractor, we work to documented safety procedures and issue a service report for your maintenance file.
Equipment We Use
Service Areas
We dispatch teams across Kuala Lumpur, Selangor and surrounding areas — usually on the same day for urgent jobs.
Frequently Asked Questions
What is high pressure water jetting used for in drainage and sewerage?
High pressure water jetting uses pressurised water to blast through stubborn blockages, hardened grease, sludge and debris inside drains and sewer pipes. It is the most effective method for clearing pipes without excavation and is used for commercial kitchens, industrial drains, sewer lines and residential drainage.
Is water jetting safe for old or PVC pipes?
Yes, when performed by trained professionals, water jetting is safe for most pipe materials including PVC, concrete, and clay pipes. Akelus Eco Solutions assesses pipe condition before jetting to use the correct pressure settings for each job.
How long does a water jetting service take?
Most water jetting jobs for commercial drains and kitchen pipelines take between 1 to 3 hours depending on pipe length, blockage severity and access conditions. Emergency same-day service is available across KL and Selangor.
How much does high pressure water jetting cost in KL?
Water jetting is quoted per job based on pipe diameter and length, the type of blockage, available access points, whether CCTV inspection is included and how urgent the call-out is. Scheduled preventive jetting costs less than emergency response. Akelus Eco Solutions gives a fixed quote after a short site check or photos sent over WhatsApp.
Is water jetting better than snaking or rodding a drain?
Rodding or snaking punches a hole through a blockage, so flow returns briefly and the pipe blocks again. High pressure water jetting scours the full internal diameter of the pipe, removing the grease and sludge layer that caused the blockage. For recurring blockages in commercial kitchens and main sewer lines, jetting is the longer-lasting solution.
How often should commercial drains be jetted?
Busy restaurants and food courts benefit from preventive jetting every 3 to 6 months, while shopping malls, factories and condominium main lines are typically jetted every 6 to 12 months. Premises with a history of recurring blockages should be on a scheduled programme rather than waiting for the next emergency.
What is an industrial high pressure water jetting system?
An industrial high pressure water jetting system pairs a high-flow, high-pressure pump with a hose reel and interchangeable nozzles, mounted on a truck or trailer and often combined with a vacuum tanker. The pump delivers enough pressure and flow to scour hardened grease, compacted silt, scale and roots out of large-bore sewers, industrial effluent lines and storm drains that portable units and rodding cannot clear.
Can water jetting clear blockages in factory and industrial effluent lines?
Yes. Industrial jetting is used on factory effluent lines, wash-bay drains, sumps, interceptors and treatment plant inlet and outfall pipework, where solids, sludge, oil and process residues build up faster than in domestic drainage. Work is scheduled around production, and a vacuum tanker on the same visit removes what is flushed out so waste leaves site for licensed disposal.
Need this service today? Talk to our team.
Same-day quotes for commercial and industrial sites across KL & Selangor. 24/7 emergency response.